Revolabs FLX2 Manuel d'utilisateur télécharger pdf (Page 17)

Placing a Telephone Call

1. From the home screen on the FLX Dialer enter the

phone number to be called.

2. Once the number is entered completely, press the

green ‘call’ button to initiate the phone call.

3. If any Microphones are out of the Charger Base and

active, the call will default to ‘speaker mode’ and

will be identified by the ring tone being played out of

the Speaker.

4. If no Microphones are available then the call will

default to ‘handset mode’ and the call will take

place on the FLX Dialer.

Answering an Incoming Telephone Call

1. When the FLX2 System identifies an incoming call,

it will play the ring tone through the FLX Speaker. If

the Dialer is not in the Charger Base it will also play

a ring tone.

2. If your phone line supports caller ID, and the caller

has not suppressed their caller ID information, the

FLX Dialer will display the caller ID information for

the incoming call.

3. A call can be answered in one of three fashions.

a. Press the Green ‘Call’ button or the ‘Answer’

key on the FLX Dialer.

b. Remove a Microphone from the charger.

c. Press the mute/unmute button on a

Microphone that is already out of the

charger.

Note: If there is either no Speaker or no Microphones active

and available when the incoming call is answered from the

FLX Dialer, the call will default to ‘handset mode’ and will

remain in ‘handset mode’. The call can only be switched to

‘speaker mode’ on the FLX Dialer if at least one Microphone is

out of the Charger Base and switched on and the Speaker is

switched on.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 50 51

Pas de commentaire

Revolabs FLX2 Manuel d'utilisateur Page 17